Hi all,
Last year I had the aircon regassed at Kwik Fit as it was no longer cold. I was under the impression this would also detect leaks in the system under the vacuum test, however it started to increase in temperature fairly soon after again! I replaced my front radiator a few months after and saw that the refrigerant was bubbling out at a fair rate from under the torque screw at the front. It's stopped bubbling now, and the air con doesn't work one bit anymore. Is it safe to say that the system will be depressurised, and that I can simply undo the screw and replace the O-ring, and re-tighten?
Cheers,
VapourXR