I've added some additional boot lighting to our estate. The one light (which had an LED put in it) was never quite in the right place. So on Sunday night I decided to add some LED light strip:
20161205_180602 by Nathan Quick, on Flickr
I removed the LED from the bulb holder, solder wires onto the bulb holder contacts, drilled a 4mm hole in the plastic and based the wires through. I have then soldered on the wires and attached to the side of the car. I have just duct taped the wire in place for the time being till I can work out a better method. I may add another strip the other side.
20161205_180618 by Nathan Quick, on Flickr